Navigation
Call Today:(250) 384-6091

Nearly one in four people in Greater Victoria is 65 or older. That’s about 93,000 residents, according to the 2021 Census. Most of them want to stay in the homes they love. This project shows what that looks like in the room that matters most: the bathroom.

Why Start With the Bathroom?

If you’re thinking about aging in place, the bathroom is the room to consider first, and early. It’s where hard, wet surfaces, tight spaces and stepping in and out of a tub all come together. It’s also where small barriers become big ones when your balance, strength or mobility changes.

Timing matters too. The features that make the biggest difference, like a curbless shower, involve the floor structure, the plumbing and the drainage. They’re straightforward to build into a planned renovation and expensive to retrofit in a hurry after a fall or surgery. Doing the bathroom while you’re healthy means you choose the design. You aren’t stuck with whatever can be installed quickly.

Phase It or Do It All at Once? It Depends on You

Aging in place doesn’t have to mean renovating the whole house in one go, but it can. Both approaches work. The right one depends mostly on your budget, your timeline and how comfortable you are living through construction.

Phasing your renovation

  • Spreads the cost over time
  • Keeps disruption limited to one area at a time
  • Lets you adjust later phases as your needs change
  • Gives you a manageable first project to learn what renovating is really like

Doing it all at once

  • Usually costs less overall: one design process, one permit stage and one round of trades on site, instead of setting up and tearing down several times
  • Avoids redoing work. One example is opening a wall for the bathroom now and again for a hallway later.
  • Gets the disruption over with in one stretch
  • Even though a bathroom is often the smallest room in the house, it can still involve just as many trades as a larger renovation. They’re simply there for less time. These can include plumbers for disconnects, rough-ins and plumbing finishes, as well as electricians, tilers, painters, carpenters and drywallers.

If you do phase, the bathroom is usually the right place to start. Its key features are the hardest to retrofit in a hurry. It’s also a contained project that gives you a real feel for the process: design choices, timelines and day-to-day disruption. When you’re ready for the next phase, like a kitchen, a main-floor bedroom or a whole-home update, you’ll know what to expect, with a team that already knows your home.

Either way, the most important step is planning the whole picture up front, even if you build it in stages. That way, each phase sets up the next one instead of getting in its way.

 

What does it cost?

In Greater Victoria, a bathroom renovation like this one typically starts at close to $40,000 (2026 pricing). The work behind the walls is fairly standard from project to project: plumbing, drainage, electrical and waterproofing for a curbless shower. What changes the price most is finishes. Tile, cabinetry, countertops, fixtures and extras like heated floors or a washlet toilet seat can add up quickly. This project came in under $75,000 (excluding GST).

The “before”: two wet zones and no room to move

This ensuite had a large jetted tub under the window and, squeezed into the corner, a small framed shower stall with sliding glass doors. There was a single sink on a laminate counter and one upper cabinet. Grey floor tile and yellow walls made the room feel darker than it was, even with a skylight overhead.

It’s a common layout in Greater Victoria homes from the 1990s and 2000s. It looks fine until you picture stepping over a tub wall at 80, or turning around in a cramped stall with a sore hip.

The big move: one curbless shower instead of two wet zones

We removed both the jetted tub and the corner stall and combined the space into one open, curbless walk-in shower. That single decision does most of the aging-in-place work in the room:

  • No step-in. The curbless entry means no tub wall to climb over and no lip to catch a foot or a walker.
  • Room to move. One generous shower is easier to use, and to help someone in, than a small stall.
  • A handheld shower on a slide bar, plus a rainhead. You can shower seated or standing.
  • Grab bars that don’t look like grab bars. They’re finished in brushed nickel to match the fixtures.
  • Slip-resistant flooring. Small mosaic tile in the shower and matte porcelain throughout.

A frameless glass panel keeps the room open and bright.

A vanity built for two, and for the long run

The single sink became a double vanity in custom BC-made maple cabinetry, with dovetail drawers and full-extension Blum soft-close hardware. A recessed toe kick lets you stand closer to the counter comfortably and gets rid of the hard-to-clean gap underneath. Custom millwork above the toilet adds storage without crowding the room. The quartz counters wrap up the wall as a backsplash, so there are fewer seams to clean. Most of the counters were cut from offcuts, which reduced waste.

Comfort you don’t notice until you have it

  • Heated floors. We reused the circuit from the old jetted tub to power in-floor heating on a programmable thermostat.
  • A washlet seat and dual-flush toilet. More hygienic, easier to use as mobility changes, and lower water use.
  • Quiet, continuous ventilation. A Panasonic WhisperFan keeps humidity and mould in check.
  • Daylight with privacy. Frosted window film instead of blinds.
  • Layered LED lighting. No dark corners and no fumbling at night.

Aging in place doesn’t have to look like a hospital

Every safety feature is in this room, and none of them announce themselves. It reads as a spa first.

Who designed it

This bathroom was designed and built by MAC Reno-Design-Build in Victoria, BC. Our project leaders Spencer Dunstan-Adam, Chris Willis and Derek Breen are CHBA Qualified Adaptiv Home Specialists. They’ve completed the Canadian Home Builders’ Association’s Adaptiv Home Renovation Course, national training in accessible renovation covering curbless showers, zero-step entries and planning for changing mobility.

Frequently Asked Questions

What is an aging-in-place bathroom?

It’s a bathroom designed so you can keep using it safely and independently as your mobility changes. The core features are a curbless or zero-threshold shower, well-placed grab bars, slip-resistant flooring, good lighting and room to move.

Why should the bathroom be the first room I renovate for aging in place?

It’s where the most risk sits, and its key features, like a curbless shower, depend on floor structure and plumbing. These are much easier and less costly to plan in advance than to retrofit urgently.

Should I phase my aging-in-place renovation or do it all at once?

Both work. Phasing spreads out cost and disruption and lets you start with the highest-impact room, usually the bathroom. Doing everything at once typically costs less overall because design, permits and trades are coordinated in one project. The deciding factor is usually your comfort level with budget and with living through construction.

Is a bathroom a good first renovation if I’m planning a bigger one later?

Yes. A bathroom is a contained project that gives you a real feel for the renovation process: design choices, timelines, budgeting and day-to-day disruption. That experience makes a larger renovation later much less stressful, and your renovation team will already understand your home’s structure, plumbing and electrical.

Is a curbless shower worth it?

For anyone planning to stay in their home long term, usually yes. Removing the step-in is one of the biggest single safety improvements you can make, and it makes the room look larger.

How much does an aging-in-place bathroom renovation cost in Victoria, BC?

In Greater Victoria, a bathroom renovation like this one typically starts at close to $45,000 (2026 pricing). The work behind the walls is fairly standard from project to project: plumbing, drainage, electrical and waterproofing for a curbless shower. What changes the price most is finishes. Tile, cabinetry, countertops, fixtures and extras like heated floors or a washlet toilet seat can add up quickly.

This project, with custom cabinetry, quartz counters and in-floor heating, came in under $75,000 (excluding GST). Preconstruction and planning can help establish a final price before the first hammer is swung.

How much does a tub-to-shower conversion cost in Victoria, BC?

In Greater Victoria, a tub-to-shower conversion typically starts at close to $16,000 (2026 pricing) for the most essential pieces. While it may feel like a less expensive, less impactful renovation, there are still many things to consider.

Are we going curbless? Are we adding a colour strip of tile to support vision loss later in life? Do we have to move the drain? Are there any hazardous materials or previous leaks behind the wall?

What is a CHBA Qualified Adaptiv Home Specialist?

It’s a designation from the Canadian Home Builders’ Association for renovators who have completed its Adaptive Home Renovation Course and passed the exam. Specialists are trained to identify safety hazards and design around a client’s current and future needs.

More Articles

Planning to build or renovate in Greater Victoria? Explore how housing styles, property conditions and local rules can shape your project in different communities.

Downsizing can mean less maintenance, more freedom to travel,  fewer unused rooms, and a home that better fits the way you want to live now. For many homeowners, it can also mean moving closer to shops, services, family, or the places they use most.

Explore home addition ideas for creating more living space without moving, including house lifts, building additions, garden suites, and accessory dwelling units.